Leica TPS1200 System Field Manual

23.5 Quality Control SettingsDescriptionAccessThe settings on this screen define the limits for coordinate quality and DOP valuesaccepted for point occupations.Select Main Menu: Config...\SmartStation...\Quality Control Settings.CONFIGUREQuality ControlSettingsCONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.Description of fieldsField Option Description None, Pos Only,Height Only orPos & HeightThe type of coordinate quality to bechecked before storing a point. If activated,the limit defined in is checked before storing a point. Awarning signal is given when the limit isexceeded. User input Available unless .The maximum acceptable coordinatequality.None, GDOP,PDOP, HDOP orVDOP User input YesNoIf activated, the limit defined in is checked. GPSpositions are unavailable when the limit isexceeded.Available unless .The maximum acceptable DOP value.2D positions can be obtained with onlythree satellites available. The height isfixed to that of the last position computedwith height.2D positions cannot be obtained with onlythree satellites available.Next stepCONT (F1) returns to TPS1200+ Main Menu.Config...\SmartStation... TPS1200+ 163