Leica TPS1200 System Field Manual

9.2 Creating a New Code/Editing a CodeAccessstep-by-stepStep Description1. Refer to "6 Manage... - Getting Started" to access MANAGE Codelists.2. In MANAGE Codelists highlight the codelist of which codes are to bemanaged.3. EDIT (F3) to access MANAGE Edit Codelist.4. CODES (F4) to access MANAGE Codes.5. MANAGE CodesCodes from currently active code groups are shown. The indicates codeswhich have attributes attached.MORE (F5) displays information about the code description, the quickcodes if available, the code groups and the code type.SHIFT GROUP (F4) To view, create, delete, activate and deactivate codegroups.SHIFT SORT (F5) sorts codes by code name, code description, quickcode or the last use.6. MANAGE CodesIf a code is to be edited, then highlight the code.7. NEW (F2)/EDIT (F3) to access MANAGE New Code/MANAGE EditCode.Editing codes is similar to creating a new code. For simplicity, the screens are calledMANAGE XX Code and differences are clearly outlined.SmartCodes is basically a quick way for code to be selected and point to be measured.For information on configuring and using SmartCodes refer to TPS1200+Technical Reference Manual.MANAGEXX CodeSTORE (F1)To add the new code and any associatedattributes to the System RAMcodelist and returns to the screenfrom where this screen wasaccessed.56 TPS1200+ Manage...\Codelists