Leica TPS1200 System Field Manual

8.3.2 Creating a New Line/Area/Editing a Line/AreaCreating/editing lines/areas and the functionality of all screens and fields are similarfor lines/areas. For simplicity, only the creation/editing of a line is explained in thischapter.Accessstep-by-stepMANAGEXX Line,General pageStep Description1. Refer to "6 Manage... - Getting Started" to access MANAGE Data: JobName.2. PAGE (F6) until the Lines (X) page is active.3. MANAGE Data: Job Name, Lines (X) pageIf a line is to be edited, then highlight the line.4. NEW (F2)/EDIT (F3) to access MANAGE New Line/MANAGE Edit Line:Line ID.Editing lines/areas is similar to creating a new line/area. For simplicity, the screensare called MANAGE XX Line and differences are clearly outlined.STORE (F1)To store the line and all associatedinformation and to return toMANAGE Data: Job Name, Lines(X) page. Any existing lines andareas which are open are closed.MORE (F5)Available on MANAGE Edit Line:Line ID. To display additional fieldswith more information.SHIFT INDIV (F5) or SHIFT RUN (F5)To change between entering an individualline ID different to the definedID template and the running line IDaccording to the ID template.Description of fieldsField Option Description User input The name of the new line. All Points,Only Msd Pts,Only Auto Pts,Only Offset1 PtsorOnly Offset2 PtsThe type of points which are used to formthe line during a survey.48 TPS1200+ Manage...\Data