Leica TPS1200 System Field Manual

20.3.4 Creating a New Device/Editing a DeviceAccessstep-by-stepCONFIGUREXX DeviceStep Description1. Refer to "20.3.2 Configuring a Device" to access CONFIGURE Devices.2. Highlight a device of the same type as the device to be created, from thelist.3. NEW (F2)/EDIT (F3) to access CONFIGURE New Device/CONFIGUREEdit Device.Editing a device is similar to creating a new device. For simplicity, the screens arecalled CONFIGURE XX Device and differences are clearly outlined.Description of fieldsField Option Description User input Available when creating a new device.The name of the device.OutputAvailable when editing a device. Thename of the device. Output The type of deviceYes or NoFrom 2400 to115200None, Odd orEvenCR/LFAvailable for digital cellular phones andmodems. Defines the device as anInternet capable device and adds it to thelist in CONFIGURE GPRS InternetDevices.Frequency of data transfer from instrumentto device in bits per second.Error checksum at the end of a block ofdigital data.To define the terminator.The terminator is a carriage returnfollowed by a line feed.CRNot available for RS232 GeoCOM andTCPS27 device. The terminator is acarriage return. 6, 7 or 8 Number of bits in a block of digital data. 1 or 2 Number of bits at the end of a block ofdigital data. None or RTS/CTS Activates hardware handshake.Interfaces, Ports, Devices TPS1200+ 131