Leica TPS1200 System Field Manual

Next stepIF the device is aradio or device other thandigital cellular phone or modemTHENSTORE (F1) to close the screen and to return tothe screen from where CONFIGURE XX Devicewas accessed.digital cellular phone or modem ATCMD (F4). Refer to paragraph "CONFIGUREGSM/Modem AT Command Lines".CONFIGUREGSM/Modem ATCommand LinesFor in CONFIGURE XX Device, this screen consists of twopages. The following table lists the fields of both pages.Description of fieldsField Option Description User input Initilisation sequence to initilise digitalcellular phone/modem. User input Allows the or the string to continue onto a new line. User input Initilisation sequence to initilise digitalcellular phone/modem. User input Dialing string used to dial the phonenumber. User input Hangup sequence used to end thenetwork connection. User input Escape sequence used to switch to thecommand mode before using the hangupsequence. User input Dialing string used to dial into the Internet.When the device is used, between and , a check for the PIN isperformed.Next stepStep Description1. STORE (F1) returns to CONFIGURE XX Device.2. STORE (F1) returns to the screen from where CONFIGURE XX Devicewas accessed.132 TPS1200+ Interfaces, Ports, Devices