Leica TPS1200 System Field Manual

More documents

Recommendations

Info

Field Option DescriptionRCS Mode Turn ON To activate RCS mode and LOCK, in CONFIGURE RCS Mode,. Turn OFF To deactive RCS mode, in CONFIGURE RCS Mode.PS Window Turn ON To activate the PowerSearch window, . Prisms are searched for withPowerSearch in the PS window when PS (F6)is pressed.If is selectedand reflectorless measurements isstill set, , then this is changed tomeasurements to reflectors, . Turn OFF To deactivate the PowerSearch window . A 360° search is performedwhen PS (F6) is pressed.V-Angle Hold The displayed value for the vertical angle isheld after DIST (F2) and until REC (F3) ispressed, .ChangeFace Runningno choicesThe displayed value for the vertical angle isupdated after DIST (F2) is pressed, .Be aware that after restarting theinstrument this setting remains andis not changed.To change the face of the telescope.Next stepHighlight the desired item and press ENTER.ORPress the desired softkey.22 TPS1200+ Quick Settings - SHIFT USER
4 Instrument Setup4.1 Instrument SetupDescriptionThis topic describes an instrument setup over a marked ground point using the laserplummet. It is always possible to set up the instrument without the need for a markedground point.Important features:• It is always recommended to shield the instrument from direct sunlight andavoid uneven temperatures around the instrument.• The laser plummet described in this topic is built into the vertical axis of theinstrument. It projects a red spot onto the ground, making it appreciably easierto centre the instrument.• The laser plummet cannot be used in conjunction with a tribrach equippedwith an optical plummet.• Refer to "TPS1200+ Technical Reference Manual" for additional informationon using the laser plummet.Setup step-by-step273SHIFTF126115 4515TPS12_019StepShieldDescriptionthe instrument from direct sunlight and avoid uneven temperaturesaround the instrument.1. Extend the tripod legs to allow for a comfortable working posture. Positionthe tripod over the marked ground point, centring it as well as possible.2. Fasten the tribrach and instrument onto the tripod.3. Turn on the instrument by pressing PROG for 2 s. Press SHIFT (F12) toaccess STATUS Level & Laser Plummet, activating the laser plummet.4. Move the tripod legs (1) and use the tribrach footscrews (6) to centre theplummet (4) over the ground point.5. Adjust the tripod legs to level the circular level (7).6. By using the electronic level turn the tribrach footscrews (6) to preciselylevel the instrument.Instrument Setup TPS1200+ 23
Page 1 and 2: Version 6.0EnglishLeica TPS1200+Sys
Page 3 and 4: Table of ContentsIn this manual Cha
Page 5 and 6: 20 Interfaces, Ports, Devices 12520
Page 7 and 8: 1 User Interface1.1 KeyboardKeysKey
Page 9 and 10: 1.3 Operating PrinciplesKeyboard an
Page 11 and 12: IconDescriptionLOCK active. Prism l
Page 13: RCS • RCS settings are displayed.
Page 16 and 17: Real-time deviceandReal-time status
Page 18 and 19: 18 TPS1200+ User Interface
Page 20 and 21: 2.2 USER KeyDescription • The USE
Page 24 and 25: StepDescription7. Centre the instru
Page 26 and 27: 4.3 SmartStation SetupSetup step-by
Page 28 and 29: 4.4 Instrument Setup for Remote Con
Page 30 and 31: StepDISTRECALLDescription(F2) to me
Page 32 and 33: CLOSE (F4) and OPEN (F4)To change b
Page 34 and 35: 34 TPS1200+ Manage... - Getting Sta
Page 36 and 37: 7.2 Creating a New Job/Editing a Jo
Page 38 and 39: MANAGEXX JobCoord SystempageMANAGEX
Page 40 and 41: 8.2 Point Management8.2.1 Creating
Page 42 and 43: MANAGEXX Point,Code pageThe setting
Page 44 and 45: 8.2.2 Mean PageDescription • Vari
Page 46 and 47: ColumndHtDescriptionThe height dist
Page 48 and 49: 8.3.2 Creating a New Line/Area/Edit
Page 50 and 51: MANAGEEdit Line: Line ID,Points pag
Page 52 and 53: Field Option DescriptionAlways avai
Page 54 and 55: 54 TPS1200+ Manage...\Data
Page 56 and 57: 9.2 Creating a New Code/Editing a C
Page 58 and 59: Field Option DescriptionBegin LineW
Page 60 and 61: Field Option Description• To star
Page 62 and 63: 10.2 Combining Linework and CodingD
Page 64 and 65: Step Field Description for thematic
Page 66 and 67: 11.2 Creating a New Coordinate Syst
Page 68 and 69: 11.3 Transformations/Ellipsoids/Pro
Page 70 and 71: Field Option Description Choicelist
Page 72 and 73:
72 TPS1200+ Manage...\Coordinate Sy
Page 74 and 75:
12.2 Creating a New Configuration S
Page 76 and 77:
76 TPS1200+ Manage...\Configuration
Page 78 and 79:
13.2 Creating a New Reflector/Editi
Page 80 and 81:
14.2 Exporting ASCII DataDescriptio
Page 82 and 83:
14.3 Exporting DXF DataGeneralAcces
Page 84 and 85:
84 TPS1200+ Convert...\Export Data
Page 86 and 87:
15.2 Importing ASCII/GSI DataRequir
Page 88 and 89:
15.3 Importing DXF DataRequirements
Page 90 and 91:
90 TPS1200+ Convert...\Copy Points
Page 92 and 93:
17.1.2 Creating a New ID Template/E
Page 94 and 95:
Description of fieldsField Option D
Page 96 and 97:
Next stepPAGE (F6) changes to the L
Page 98 and 99:
Field Option Description User input
Page 100 and 101:
Page 102 and 103:
Field Option DescriptionLow Vis Alw
Page 104 and 105:
CONFIGURESearch Windows,ATR Window
Page 106 and 107:
18.4 TPS CorrectionsDescriptionAcce
Page 108 and 109:
Next stepCONT (F1) returns to the s
Page 110 and 111:
18.6 Instrument IDDescriptionAccess
Page 112 and 113:
Page 114 and 115:
19.2 Hot Keys & User MenuDescriptio
Page 116 and 117:
19.3 Units & FormatsDescriptionAcce
Page 118 and 119:
Field Option DescriptionDay.Month.Y
Page 120 and 121:
19.5 Lights, Display, Beeps, TextDe
Page 122 and 123:
19.6 Start Up & Power DownDescripti
Page 124 and 125:
124 TPS1200+ Config...\General Sett
Page 127 and 128:
20.2 PortsDescription • The instr
Page 129 and 130:
20.3.2 Configuring a DeviceDescript
Page 131 and 132:
20.3.4 Creating a New Device/Editin
Page 133 and 134:
21 Config...\Interfaces... - Editin
Page 135 and 136:
21.3 RCS ModeDescriptionAccessCONFI
Page 137 and 138:
21.5 GPS RTKDescription • The set
Page 139 and 140:
22 Config...\Interfaces... - Contro
Page 141 and 142:
Next stepIF the digitalcellular pho
Page 143 and 144:
22.3 Radios for GPS Real-TimeDescri
Page 145 and 146:
22.5 RS232DescriptionConfigure RS23
Page 147 and 148:
22.7 InternetDescriptionConfig...\I
Page 149 and 150:
22.8 Creating a New Station to Dial
Page 151 and 152:
22.9 Creating a New Server to Conne
Page 153 and 154:
23 Config...\SmartStation...23.1 Re
Page 156 and 157:
CONFIGUREAdditional RoverOptions,NT
Page 158 and 159:
Field Option DescriptionTime,Observ
Page 160 and 161:
23.3 Satellite SettingsDescriptionA
Page 162 and 163:
23.4 Local Time ZoneDescriptionAcce
Page 164 and 165:
23.6 Logging of Raw ObsDescription
Page 166:
24.2 Transfer Objects...Description
Page 169 and 170:
24.4 Calculator and File ViewerRefe
Page 171:
24.6 Field to OfficeDescriptionSupp
Page 175 and 176:
25.3 STATUS: System InformationAcce
Page 177 and 178:
25.4 STATUS: Interfaces...Descripti
Page 179 and 180:
25.6 STATUS: Level & Laser PlummetD
Page 181 and 182:
ColumnAzmthS/N 1 and S/N 2Descripti
Page 183 and 184:
FieldDescriptionAvailable for .Seco
Page 185 and 186:
Field • For , or with :The anten
Page 187 and 188:
25.7.3 Current PositionDescriptionA
Page 189 and 190:
25.7.4 Logging StatusDescriptionAcc
Page 191 and 192:
25.7.5 SmartAntenna System InfoAcce
Page 193 and 194:
26 NTRIP via Internet26.1 OverviewD
Page 195 and 196:
Step Description12. USER13. STAT (F
Page 197 and 198:
Step DescriptionCheck the Internet
Page 199 and 200:
StepDescription Indicates if charge
Page 201 and 202:
27 Menu TreeMenu treeMAIN MENU||—
Page 203 and 204:
IndexAAbsolute coordinate differenc
Page 205 and 206:
Dynamic ATR window ................
Page 207 and 208:
Line codeFilter ...................
Page 209 and 210:
Start time ........................
show all

Leica TPS1200 System Field Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?