Leica TPS1200 System Field Manual

15.3 Importing DXF DataRequirements • At least one DXF file with the file extension *.dxf has to be stored in the \DATAdirectory of the CompactFlash card.AccessRefer to "15.1 Overview" to access Import DXF Data to Job.DXF IMPORTImport DXF Data toJobDescription of fieldsCONT (F1)To import the data.CONF (F2)To define an optional prefix forblocks, points and/or lines, to selectthe file units, to activate the creationof points at vertices of the importedgeometric elements, to convert whitecolored elements to black coloredelements, if required and to exclude aheight value from conversion.Field Option Description Choicelist DXF data can be imported to a job, from eitherthe CompactFlash card or internal memory. Choicelist Choosing a job as destination for import makesthis job the active job. Output Progress bar of the import procedure.88 TPS1200+ Convert...\Import Data to Job