Leica TPS1200 System Field Manual

Field Option Description Choicelist The receiver type used at the reference. If theGPS real-time data format does not containthe information of the receiver type certaincorrections based on the information of thereceiver type are applied in order to providecorrect results. The GPS real-time dataformats Leica, CMR and CMR+ contain thisinformation. This is mainly important when aSystem300 receiver is used as reference. Choicelist The antenna used at the reference. If theGPS real-time data format does not containthe information of the antenna certain correctionsbased on the information of the antennaare applied in order to provide correct results.The GPS real-time data formats Leica,RTCM v2.3, CMR and CMR+ contain thisinformation.If the reference data is corrected by absoluteantenna calibration values and a Leicastandard antenna is being used on the rover,select ADVNULLANTENNA as referenceantenna.CONFIGUREAdditional RoverOptions,General pageThe available fields depend on the selected in CONFIGURE Real-Time Mode.CONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.GGA (F4)To activate the sending of a GGAmessage for reference network applications.GETID (F5)Available for . To display and select thestation ID of the available referencestations, the latency of the messageand the data format. When usingradios, the radio channel can beswitched and the stations received onthe new frequency are displayed.1st (F6)Available for . To force the system totry to establish a new connection witha different reference station.154 TPS1200+ Config...\SmartStation...