Leica TPS1200 System Field Manual

17.4 OffsetsDescriptionOffsets can be configured and entered. The offset values are applied to measuredpoints. The Offset function allows offset points to be determined, for instance whenthe reflector cannot be set up directly on a point. Transverse, longitudinal and/orelevation offsets can be defined from the reflector position to the offset point. All ofthe displayed and recorded measurement data is in relation to the offset point.DiagramP2d6Accessd3d5P3P0TPS12_041d1P1d2P0 StationP1 Current positionP2 Offset pointP3 Offset pointd1 Offset cross -d2 Offset cross +d3 Offset length -d4 Offset length +d5 Offset height -d6 Offset height +If configured in a display mask, the offset values appear also in the display mask inSurvey.Select Main Menu: Config...\Survey Settings...\Offsets.d4CONFIGUREOffsetsCONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.OFS=0 (F5)To set all offsets to 0.000.Description of fieldsField Option Description Reset after REC The offset values are reset to 0.000 aftera point is measured with REC (F3) or ALL(F1).Permanent The offset values are applied to everymeasured point until reset or changed.Config...\Survey Settings... TPS1200+ 97