Leica TPS1200 System Field Manual

23 Config...\SmartStation...23.1 Real-Time ModeDescriptionAccessCONFIGUREReal-Time ModeThe settings on this screen allow GPS real-time related parameters to be configured.This includes defining whether SmartStation should operate as a rover (static, as ona tripod) and the type of GPS real-time messages to be used.Select Main Menu: Config...\SmartStation...\Real-Time Mode.CONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.ROVER (F2)To configure additional settings relevantto rover operations.DEVCE (F5)To create, select, edit or delete adevice.Description of fieldsField Option Description NoneSmartStation is not to be used as a GPS realtimerover.RoverActivates a rover GPS real-time interface. Choicelist The GPS real-time data format which is to bereceived from the reference station.Port to which the device is attached.Port 1For communication and/or power. This port islocated at the base of the instrument.For TPS1200+: 5 pin LEMO-0Port 2 (Handle)Port 3 (BT)NETxHotshoe connection for RadioHandle withRCS and SmartAntenna Adapter with Smart-Station. This port is located on top of Communicationside cover.Bluetooth module for communication withonly Bluetooth capable devices. This port ishoused within Communication side cover.Available for an activated Internet interface. Ifthese ports are not assigned to a specificinterface, then these ports are additionalremote ports.Config...\SmartStation... TPS1200+ 153