Leica TPS1200 System Field Manual

More documents

Recommendations

Info

4.3 SmartStation SetupSetup step-by-stepStepReferDescriptionto "4.1 Instrument Setup" for the initial instrument setup onto atripod. Remove the instrument carry handle by simultaneously pressingand holding-in the four push buttons.TPS12_194Step Description1. A circular screw is located at one end of the clip-on-housing. Ensure thatthe circular screw is in the unlocked position. Turn it anticlockwise, asshown by the lock and arrow symbols on the screw.2. Slide the clip-on-housing into position underneath the SmartAntennaAdapter, such that the guide rails on the clip-on-housing and the guiderails on the SmartAntenna Adapter are aligned.Ensure that the connector located at the end of the clip-on-housing fits intoits port of the SmartAntenna Adapter.3. Lock the circular screw by turning it clockwise, as shown by the lock andarrow symbols on the screw. The clip-on-housing is now locked into position.4. Thread the antenna onto the clip-on-housing.TPS12_19526 <strong>TPS1200</strong>+ Instrument Setup
Step Description5. Place the SmartAntenna Adapter with attached clip-on-housing onto theinstrument by simultaneously pressing and holding-in the four pushbuttons.Ensure that the interface connection on the underside of the Smart-Antenna Adapter is on the same side as the Communication side cover.TPS12_209Step Description6. Place the SmartAntenna onto the SmartAntenna Adapter by simultaneouslypressing and holding-in the two press clips.Ensure that the clip-on-contacts on the underside of the SmartAntennaare aligned to the clip-on-contacts of the SmartAntenna Adapter.Instrument Setup <strong>TPS1200</strong>+ 27
Page 1 and 2: Version 6.0EnglishLeica TPS1200+Sys
Page 3 and 4: Table of ContentsIn this manual Cha
Page 5 and 6: 20 Interfaces, Ports, Devices 12520
Page 7 and 8: 1 User Interface1.1 KeyboardKeysKey
Page 9 and 10: 1.3 Operating PrinciplesKeyboard an
Page 11 and 12: IconDescriptionLOCK active. Prism l
Page 13: RCS • RCS settings are displayed.
Page 16 and 17: Real-time deviceandReal-time status
Page 18 and 19: 18 TPS1200+ User Interface
Page 20 and 21: 2.2 USER KeyDescription • The USE
Page 22 and 23: Field Option DescriptionRCS Mode T
Page 24 and 25: StepDescription7. Centre the instru
Page 28 and 29: 4.4 Instrument Setup for Remote Con
Page 30 and 31: StepDISTRECALLDescription(F2) to me
Page 32 and 33: CLOSE (F4) and OPEN (F4)To change b
Page 34 and 35: 34 TPS1200+ Manage... - Getting Sta
Page 36 and 37: 7.2 Creating a New Job/Editing a Jo
Page 38 and 39: MANAGEXX JobCoord SystempageMANAGEX
Page 40 and 41: 8.2 Point Management8.2.1 Creating
Page 42 and 43: MANAGEXX Point,Code pageThe setting
Page 44 and 45: 8.2.2 Mean PageDescription • Vari
Page 46 and 47: ColumndHtDescriptionThe height dist
Page 48 and 49: 8.3.2 Creating a New Line/Area/Edit
Page 50 and 51: MANAGEEdit Line: Line ID,Points pag
Page 52 and 53: Field Option DescriptionAlways avai
Page 54 and 55: 54 TPS1200+ Manage...\Data
Page 56 and 57: 9.2 Creating a New Code/Editing a C
Page 58 and 59: Field Option DescriptionBegin LineW
Page 60 and 61: Field Option Description• To star
Page 62 and 63: 10.2 Combining Linework and CodingD
Page 64 and 65: Step Field Description for thematic
Page 66 and 67: 11.2 Creating a New Coordinate Syst
Page 68 and 69: 11.3 Transformations/Ellipsoids/Pro
Page 70 and 71: Field Option Description Choicelist
Page 72 and 73: 72 TPS1200+ Manage...\Coordinate Sy
Page 74 and 75: 12.2 Creating a New Configuration S
Page 76 and 77:
76 TPS1200+ Manage...\Configuration
Page 78 and 79:
13.2 Creating a New Reflector/Editi
Page 80 and 81:
14.2 Exporting ASCII DataDescriptio
Page 82 and 83:
14.3 Exporting DXF DataGeneralAcces
Page 84 and 85:
84 TPS1200+ Convert...\Export Data
Page 86 and 87:
15.2 Importing ASCII/GSI DataRequir
Page 88 and 89:
15.3 Importing DXF DataRequirements
Page 90 and 91:
90 TPS1200+ Convert...\Copy Points
Page 92 and 93:
17.1.2 Creating a New ID Template/E
Page 94 and 95:
Description of fieldsField Option D
Page 96 and 97:
Next stepPAGE (F6) changes to the L
Page 98 and 99:
Field Option Description User input
Page 100 and 101:
Page 102 and 103:
Field Option DescriptionLow Vis Alw
Page 104 and 105:
CONFIGURESearch Windows,ATR Window
Page 106 and 107:
18.4 TPS CorrectionsDescriptionAcce
Page 108 and 109:
Next stepCONT (F1) returns to the s
Page 110 and 111:
18.6 Instrument IDDescriptionAccess
Page 112 and 113:
Page 114 and 115:
19.2 Hot Keys & User MenuDescriptio
Page 116 and 117:
19.3 Units & FormatsDescriptionAcce
Page 118 and 119:
Field Option DescriptionDay.Month.Y
Page 120 and 121:
19.5 Lights, Display, Beeps, TextDe
Page 122 and 123:
19.6 Start Up & Power DownDescripti
Page 124 and 125:
124 TPS1200+ Config...\General Sett
Page 127 and 128:
20.2 PortsDescription • The instr
Page 129 and 130:
20.3.2 Configuring a DeviceDescript
Page 131 and 132:
20.3.4 Creating a New Device/Editin
Page 133 and 134:
21 Config...\Interfaces... - Editin
Page 135 and 136:
21.3 RCS ModeDescriptionAccessCONFI
Page 137 and 138:
21.5 GPS RTKDescription • The set
Page 139 and 140:
22 Config...\Interfaces... - Contro
Page 141 and 142:
Next stepIF the digitalcellular pho
Page 143 and 144:
22.3 Radios for GPS Real-TimeDescri
Page 145 and 146:
22.5 RS232DescriptionConfigure RS23
Page 147 and 148:
22.7 InternetDescriptionConfig...\I
Page 149 and 150:
22.8 Creating a New Station to Dial
Page 151 and 152:
22.9 Creating a New Server to Conne
Page 153 and 154:
23 Config...\SmartStation...23.1 Re
Page 156 and 157:
CONFIGUREAdditional RoverOptions,NT
Page 158 and 159:
Field Option DescriptionTime,Observ
Page 160 and 161:
23.3 Satellite SettingsDescriptionA
Page 162 and 163:
23.4 Local Time ZoneDescriptionAcce
Page 164 and 165:
23.6 Logging of Raw ObsDescription
Page 166:
24.2 Transfer Objects...Description
Page 169 and 170:
24.4 Calculator and File ViewerRefe
Page 171:
24.6 Field to OfficeDescriptionSupp
Page 175 and 176:
25.3 STATUS: System InformationAcce
Page 177 and 178:
25.4 STATUS: Interfaces...Descripti
Page 179 and 180:
25.6 STATUS: Level & Laser PlummetD
Page 181 and 182:
ColumnAzmthS/N 1 and S/N 2Descripti
Page 183 and 184:
FieldDescriptionAvailable for .Seco
Page 185 and 186:
Field • For , or with :The anten
Page 187 and 188:
25.7.3 Current PositionDescriptionA
Page 189 and 190:
25.7.4 Logging StatusDescriptionAcc
Page 191 and 192:
25.7.5 SmartAntenna System InfoAcce
Page 193 and 194:
26 NTRIP via Internet26.1 OverviewD
Page 195 and 196:
Step Description12. USER13. STAT (F
Page 197 and 198:
Step DescriptionCheck the Internet
Page 199 and 200:
StepDescription Indicates if charge
Page 201 and 202:
27 Menu TreeMenu treeMAIN MENU||—
Page 203 and 204:
IndexAAbsolute coordinate differenc
Page 205 and 206:
Dynamic ATR window ................
Page 207 and 208:
Line codeFilter ...................
Page 209 and 210:
Start time ........................
show all

Leica TPS1200 System Field Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?