Leica TPS1200 System Field Manual

Next stepPAGE (F6) changes to the Linework page.CONFIGURECoding &Linework,Linework pageThe flags for Linework are defined on this screen.The flags defined on this screen are linked to the options available for in a display mask of an application program. The selection for in adisplay mask determines the flag stored with a point. The availability of in a display mask is configured in CONFIGURE Define Display Mask n.Description of fieldsField Option Description User input Opens a new line when the next point isstored. Any lines which are currently openare closed. The point may or may not bestored with a point code. User input Stores the linework flag for a curvethrough three points and continues aline/area. User input Opens the last used line again. User input Closes all open lines. User input Indicates a line/area is open. User input Stores the linework flag for beginning aspline and continues any open line/area. User input Stores the linework flag to stop a spline. User input Indicates a line/area is open with splineline type. User input Opens a new area when the next point isstored. Any areas which are currentlyopen are closed. The point may or maynot be stored with a point code. User input Opens the last used area again. User input Closes all open areas.Next stepCONT (F1) returns to the screen from where CONFIGURE Coding & Linework wasaccessed.96 TPS1200+ Config...\Survey Settings...