Leica TPS1200 System Field Manual

22.9 Creating a New Server to Connect/Editing a Server to ConnectDescriptionAccess step-bystepCONFIGURE Server to Connect allows new servers to be created, provides a listof servers to be connect in the internet and allows existing servers to be edited. Forservers to be accessed in the Internet the IP address and the TCP/IP port must beknown. For a server to be accessed in the Internet a name can be configured.Step Description1. Refer to "20.3.3 Controlling a Device" to access CONFIGURE XXConnection/CONFIGURE Radio Channel.2. Open the choicelist for to access CONFIGURE Server toConnect.3. CONFIGURE Server to ConnectIf a server is to be edited, then highlight the server.4. NEW (F2)/EDIT (F3) to access CONFIGURE New Server toConnect/CONFIGURE Edit Server to Connect.Editing a server to connect is similar to creating a new server to connect. Forsimplicity the screens are called CONFIGURE XX Server to Connect and differencesare clearly outlined.CONFIGUREXX Server toConnectSTORE (F1)To store the changes and to continuewith the subsequent screen.Description of fieldsField Option Description User input A unique name for the new server to beaccessed in the Internet. The name may be upto 16 characters long and may include spaces. User input The IP address of the server to be accessed inthe Internet. User input The port of the Internet server through which thedata is provided. Each server has several portsfor various services.Config...\Interfaces... - Controllingthe DeviceTPS1200+ 151