Leica TPS1200 System Field Manual

14.2 Exporting ASCII DataDescriptionRequirementsAccessEXPORTExport ASCII Datafrom JobThe settings on this screen define the data that is converted and exported and whatformat is used.Data is exported from the selected job. Currently active view, filter and sort settingsare applied. The points that are exported are those that are visible in MANAGEData: Job Name.At least one format file was created using LGO and has been transferred to theSystem RAM.Select Main Menu: Convert...\Export Data from Job\Export ASCII.CONT (F1)To export the data.CONF (F2)To define the default extension forthe export file and to select thebehaviour for the setup measurements.FILT (F4)To set the sort and filter settings forexport. The setting for on thePoints page defines the order inwhich points, lines and areas areexported. The setting for oneach page defines which points, linesor areas are exported.IFACE (F5)Available for .To choose the port and device towhich the data should be exported.CSYS (F6)To update the coordinate system inwhich the coordinates are exported.Description of fieldsField Option Description CF Card,Internal Memory ifDefines to where the exported file shouldbe written.fitted, or RS232 Data, GSI or /Root Available for . Thedata can be exported to the \Data, the\GIS or the root directory. Data must bestored to the \GSI directory in order toread it in a TPS1100. For , the data is alwaysexported to the \Data directory.80 TPS1200+ Convert...\Export Data from Job