Leica TPS1200 System Field Manual

23.2 Point Occupation SettingsDescriptionAccessCONFIGUREPoint OccupationSettingsThe settings on this screen define the way in which points are occupied andrecorded.Select Main Menu: Config...\SmartStation...\Point Occupation Settings.CONT (F1)To accept changes and return to thescreen from where this screen wasaccessed.PARAM (F3)To configure the time interval afterwhich a point occupation can bestopped automatically.Description of fieldsField Option Description Normal The way in which coordinates for a pointare recorded.This field is fixed to . NoStarts point occupation when pressingOCUPY (F1).YesStarts point occupation automaticallywhen entering SETUP New StationPoint.TimedStarts point occupation automatically at acertain time. The start time is specified inSETUP New Station Point. Yes or No Stops the measurements automaticallywhen the parameter defined for reaches 100 %.Available for . Definesthe method used for .The setting determines the computation ofthe duration of the point occupation.Parameters for the selected method aredefined with PARAM (F3).Accuracy orPositionsAvailable for .Config...\SmartStation... TPS1200+ 157