Leica TPS1200 System Field Manual

22.7 InternetDescriptionConfig...\Interfaces... - Controllingthe DeviceThe Internet connection is available for SmartStation.The Internet connection allows SmartStation to be connected to the Internet toreceive real-time data. A GPRS / Internet device must be attached.Requirements • in CONFIGURE Internet Interface.• assigned to an interface in CONFIGURE Interfaces.Configure port NETstep-by-stepStep Description1. Refer to "20.1.2 Configuring an Interface" to access CONFIGURE Interfaces.2. CONFIGURE InterfacesHighlight an interface which has an Internet device attached.3. CTRL (F4) to access CONFIGURE Set NET Port.4. CONFIGURE Set NET Port, General page The name of the port NET that was attached to the interfacethat was highlighted when this page was accessed. How SmartStation will operate in the Internet. must be selected when using NTRIP as Internet application.Inside the Internet NTRIPClients and NTRIPServers are consideredas clients. must be selected when SmartStation is the server.For : Type in the IP address of the server to be accessedin the Internet.For : Output of the IP address associated with the staticIP address as configured in CONFIGURE Internet Interface. A number can be assigned to each of the ports. Type inthe NET port number. Available for .For in CONFIGURE Real-Time ModeAllows for automatic connection between the rover and the Internet whena point is occupied during a survey. Ending the point occupation alsoends the Internet connection.5. PAGE (F6) to access CONFIGURE Set NET Port, Ranges page6. CONFIGURE Set NET Port, Ranges pageFor in CONFIGURE Set NET Port, General page, thefields are input fields. The fields and can be used to prevent a user with an IP address outside the definedranges from accessing the instrument.Enter the IP address ranges.CLEAR (F5) returns the fields back to their default values.TPS1200+ 147