Leica TPS1200 System Field Manual

MANAGEEdit Line: Line ID,Points pageAll points belonging to the line are listed. The point that was added last to the line isat the top of the list.ADD (F2)To add an existing point from theactive job to the line. A new point isadded before the point which washighlighted when ADD (F2) waspressed.EDIT (F3)To edit the highlighted point from theline.REMOV (F4)To remove the highlighted point fromthe line. The point itself is not deleted.MORE (F5)To display more information in thesecond column.Next stepPAGE (F6) changes to the Code page.MANAGEXX Line,Code pageCreatinglines/areas mostefficientlyThe functionality is very similar to MANAGE New Point, Code page. Refer to "8.2.1Creating a New Point/Editing a Point".Next stepSTORE (F1) stores the changes and returns to MANAGE Data: Job Name, Lines(X) page.IF the task is tocreatemultiple lines/areaswith subsequentline/area ID’slines/areas withcertain codesTHENuse the hot key/user menu function FUNC Create New Line(Quick)/FUNC Create New Area (Quick). Pressing the hotkey or selecting the function from the user menu creates andimmediately stores the new line/area. For the line/area ID, theline/area ID template as defined in CONFIGURE IDTemplates is used. The code and attributes are taken overfrom the last created line/area.use quick coding. The job codelist must contain quick codesfor lines/areas. By tying the quick code a new line/area iscreated and immediately stored with that line/area code andattributes. For the line/area ID, the line/area ID template asdefined in CONFIGURE ID Templates is used.50 TPS1200+ Manage...\Data