Leica TPS1200 System Field Manual

DIST (F2)To measure and display distances.Available unless and/or , after the tracking or logging isstarted.REC (F3)To record data. If and/or , records measured point andcontinues tracking.Linework andcodingstep-by-stepThese step-by-step instructions refer to the previous screen.For Step Field Description for thematical codingWith codelistWithout codelist1. Select a code from thechoicelist. Only point codesare available for selection.Type in a code.2. to store a pointwithout code or to performLinework without coding.----- to store a point withoutcode or to perform Lineworkwithout coding.Point is displayed. This field is an output field. It can not bechanged.3. Select an option for the Linework flag to be stored with thepoint.----- to store a point without Linework flag or to performcoding without Linework.4. - ALL (F1)-• The point is stored with the selected code.- • Depending on the selection for , aline/area is opened/closed.For Step Field Description for thematical codingWith codelistWithout codelist1. Select a code from thechoicelist. Point, line andarea codes are available forselection.Type in a code. to store a pointwithout code or to performLinework without coding.----- to store a point withoutcode or to perform Lineworkwithout coding.Linework TPS1200+ 63