Leica TPS1200 System Field Manual

22.5 RS232DescriptionConfigure RS232connectionstep-by-stepRS232 is a standard serial communication method that is able to transfer datawithout the need for predefined time slots. RS232 can be used, with a Bluetoothhousing, to provide a wireless connection to another Bluetooth enabled device, forexample, a computer.The following table explains the most common settings. Refer to the stated chapterfor more information on screens.Step Description1. Refer to "20.1.2 Configuring an Interface" to access CONFIGURE Interfaces.2. In CONFIGURE Interfaces highlight an interface which has an RS232device attached.3. CTRL (F4) to access CONFIGURE RS232 Connection.4. CONFIGURE RS232 Connection The type of device highlighted when CONFIGURE RS232Connection was accessed. SmartStation detects automatically if the attached deviceis bluetooth capable. Some devices ask for the identification number ofthe Bluetooth. The identification number of Leica’s Bluetooth is 0000. Available for . The ID address of theBluetooth device to be used. Refer to the device’s user manual for informationabout the ID address.SRCH (F4) available for , to search for all availableBluetooth devices. If more than one Bluetooth device is found a list ofavailable devices is provided.SCAN (F5) provides information such as the station ID, latency and thedata format of incoming signals from reference stations. This informationcan be used to select appropriate reference stations to dial.5. CONT (F1) returns to CONFIGURE Interfaces.Config...\Interfaces... - Controllingthe DeviceTPS1200+ 145