Leica TPS1200 System Field Manual

22.2 ModemsDescriptionConfigure modemconnectionstep-by-stepFor modems, information such as:• the reference stations that can be contacted and• the phone numbers of the reference stations can be controlled.The following table explains the most common settings. Refer to the stated chapterfor more information on screens.Step Description1. Refer to "20.1.2 Configuring an Interface" to access CONFIGURE Interfaces.2. In CONFIGURE Interfaces highlight an interface which has a modemattached.3. CTRL (F4) to access CONFIGURE Modem Connection.4. CONFIGURE Modem Connection The type of modem highlighted when CONFIGUREModem Connection was accessed. The modem reference station to be dialled. AccessesCONFIGURE Stations to Dial where new reference stations can becreated and existing reference stations can be selected or edited. The number of the modem at the selected asconfigured in CONFIGURE Stations to Dial.Select the modem reference station to be dialled.NEAR (F2) finds the nearest reference station with a modem. Availablewhen reference stations to dial are already created in CONFIGUREStations to Dial. Coordinates of these stations must be known.5. CONT (F1) returns to CONFIGURE Interfaces.142 TPS1200+ Config...\Interfaces... - Controllingthe Device