Leica TPS1200 System Field Manual

23.3 Satellite SettingsDescriptionAccessThe settings on this screen define which satellite system (available for SmartStationwih ATX1230 GG), satellites and satellite signals will be used by the receiver.Select Main Menu: Config...\SmartStation...\Satellite Settings.CONFIGURESatellite SettingsCONT (F1)To accept changes and return toTPS1200+ Main Menu.Description of fieldsField Option DescriptionAvailable for SmartStation/ATX1230 GG.Defines the satellite signals accepted bythe receiver when tracking satellites.GPS Only Only GPS satellites are tracked.GPS & Glonass GPS and GLONASS satellites aretracked. Automatic orAlways TrackAvailable for SmartStation/ATX1230 GG.Defines if the L2C signal will be tracked.The recommended setting is Automatic. User input Sets the elevation in degrees below whichsatellite signals are not recorded and arenot shown to be tracked. Recommendedsettings:For GPS real-time: 10°.For other applications: 15°.Beep & MessageorNoBeep/MessageAutomatic orAlways OnActivates an acoustic warning signal andmessage given by SmartStation whensatellites are lost and therefore no positioncan be computed.Available for SmartStation/ATX1230 GG.Defines if phase multipath mitigationtechniques will be used. The recommendedsetting is Automatic.160 TPS1200+ Config...\SmartStation...