Leica TPS1200 System Field Manual

11.3.2 Creating/Editing a Transformation/Ellipsoid/ProjectionAccessstep-by-stepCreating/editing an ellipsoid/projection is very similar to creating/editing a transformationwhich is explained below. The main difference is that MANAGE XX Ellipsoidand MANAGE XX Projection do not use pages and all the information is input onone screen.Classic 3D transformations can be created.Step Description1. Refer to "11.3.1 Accessing Transformation/Ellipsoid/Projection Management"to access MANAGE Transformations.2. In MANAGE Transformations highlight a transformation. When creatinga new transformation/ellipsoid/projection, a copy of this transformation/ellipsoid/projectionis taken for further configurations.3. NEW (F2)/EDIT (F3) to access MANAGE New Transformation/MANAGEEdit Transformation.Editing a transformation is similar to creating a new transformation. For simplicity,the screens are called MANAGE XX Transformation and differences are clearlyoutlined.MANAGEXX Transformation,General pageDescription of fieldsField Option Description User input A unique name for the new transformation.The name may be up to 16 characterslong and may include spaces. Output No other transformations than Classic 3Dcan be created.Next stepPAGE (F6) changes to the Parameters page.MANAGEXX Transformation,Parameters pageMANAGEXX Transformation,More pageEnter the known values of the transformation parameters.Next stepPAGE (F6) changes to the More page.Description of fieldsField Option Description Choicelist orOutputThe type of heights to be computed.When editing a transformation, the optioncannot be changed.Manage...\Coordinate Systems TPS1200+ 69