Leica TPS1200 System Field Manual

Description of fieldsField Option Description Output Available for digital cellular phones of GSM technology.The type of digital cellular phone highlightedwhen CONFIGURE XX Connection wasaccessed. Output Available for digital cellular phones of CDMAtechnology. The type of digital cellular phonehighlighted when CONFIGURE XX Connectionwas accessed. Yes or No SmartStation detects automatically if theattached device is bluetooth capable. Somedevices ask for the identification number of theBluetooth. The identification number of Leica’sBluetooth is 0000. User input Available for . The ID addressof the Bluetooth device to be used. Refer to thedevice’s user manual for information about theID address. Choicelist The digital cellular phone reference station to bedialed. Opening the choicelist accessesCONFIGURE Stations to Dial where new referencestations can be created and existing referencestations can be selected or edited. Output The number of the digital cellular phone at theselected as configured inCONFIGURE Stations to Dial. Output Available for digital cellular phones of GSM technology.The configured protocol of the digitalcellular phone at the selected asconfigured in CONFIGURE Stations to Dial. Yes or No Allows for automatic connection between therover and the reference when a point is occupiedduring a survey. Autobauding,2400 bps to56000 bpsAvailable for digital cellular phones of GSM technology.The network baud rate. Select Autobaudingfor an automatic search of the networkbaud rate. For digital cellular phones of GSMtechnology that do not support autobaudingchoose the baud rate from the choicelist.Available for digital cellular phones of GSM technology.Define if the digital cellular phone usesRadio Link Protocol.Transparent For digital cellular phones that do not use RLP.Non-TransparentFor digital cellular phones that use RLP.140 TPS1200+ Config...\Interfaces... - Controllingthe Device