Leica TPS1200 System Field Manual

Field Option DescriptionBegin Area Opens a new area when the next point isstored. Any line/area which is currentlyopen is closed and the last pointbelonging to that line/area is given theEnd Line/Close Area linework flag. Thepoint may or may not be stored with apoint code.ReOpen Any Area Opens an area from a list of all lines whichare currently stored in the job when thenext point is stored. The last code usedwith the reopened area is automaticallyselected when the point is stored. Anyline/area which is currently open is closedand the last point belonging to thatline/area is given theEnd Line/Close Area linework flag.ReOpen LastAreaClose AreaOpens the last used area again. The lastcode used with the reopened area is automaticallyselected when the point isstored.Closes all open areas.Next stepStep Description1. Go to the point to be occupied.2. Select the linework flag to be stored with the next point.3. ALL (F1)Depending on the option selected for , a line/area is opened,closed or re-opened.4. Repeat steps 1. to 3. until all points are occupied.5. SHIFT QUIT (F6) to exit the Survey application program.6. Use a format file to export the points including the linework flags.Linework TPS1200+ 61