M16C/62 Group DATASHEET

Operating maximum frequency [MHZ]Operating maximum frequency [MHZ]Operating maximum frequency [MHZ]Operating maximum frequency [MHZ]Electrical characteristicsMitsubishi microcomputersM16C / 62 GroupSINGLE-CHIP 16-BIT CMOS MICROCOMPUTERTable 1.26.2. Recommended operating conditions (referenced to VCC = 2.7V to 5.5V at Ta = – 20 o Cto 85 o C / – 40 o C to 85 o C(Note3) unless otherwise specified)StandardSymbol Parameter UnitP100Min Typ. Max.Vcc Supply voltage2.7 5.0 5.5 VAVcc Analog supply voltageVccVVssAVssSupply voltageAnalog supply voltage00VVHIGH input P31 to P37, P40 to P47, P50 to P57, P60 to P67,to P97, to P107,voltageVIHP72 to P77, P80 to P87, P90XIN, RESET, CNVSS, BYTE0.8VccVcc VHIGH peak output P00 to P07, P10 to P17, P20 to P27,P30 to P37,I OH (peak) currentP40 to P47, P50 to P57, P60 to P67,P72 to P77,-10.0 mAP70 , P710.8Vcc 6.5 VP00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode) 0.8VccVcc VP00 to P07, P10 to P17, P20 to P27, P30(data input function during memory expansion and microprocessor modes)0.5VccVcc VLOW input P31 to P37, P40 to P47, P50 to P57, P60 to P67,voltage P70 to P77, P80 to P87, P90 to P97, P100 to P107,00.2Vcc VVILXIN, RESET, CNVSS, BYTEP00 to P07, P10 to P17, P20 to P27, P30 (during single-chip mode) 00.2Vcc VP00 to P07, P10 to P17, P20 to P27, P30(data input function during memory expansion and microprocessor modes)00.16Vcc VP80 to P84,P86,P87,P90 to P97,P100 to P107I OL (avg)HIGH average output P00 to P07, P10 to P17, P20 to P27,P30 to P37,I OH (avg) currentP40 to P47, P50 to P57, P60 to P67,P72 to P77,-5.0 mAP80 to P84,P86,P87,P90 to P97,P100 to P107LOW peak output P00 to P07, P10 to P17, P20 to P27,P30 to P37,I OL (peak) currentP40 to P47, P50 to P57, P60 to P67,P70 to P77,P80 to P84,P86,P87,P90 to P97,P100 to P10710.0 mALOW average P00 to P07, P10 to P17, P20 to P27,P30 to P37,output current P40 to P47, P50 to P57, P60 to P67,P70 to P77,5.0 mAP80 to P84,P86,P87,P90 to P97,P100 to P107EPROM version, Vcc=4.5V to 5.5V 016 MHzNo waitOne time PROMVcc=2.7V to 4.5V 06.95 X Vccversion-15.275 MHzMask ROM version, Vcc=4.2V to 5.5V 016 MHzFlash memory 5V7.33 X Vccf (XIN)version (Note 5) Vcc=2.7V to 4.2V 0Main clock input-14.791 MHzoscillation frequencyEPROM version, Vcc=4.5V to 5.5V 016 MHzWith waitOne time PROMVcc=2.7V to 4.5V 05X Vccversion-6.5MHzMask ROM version, Vcc=4.2V to 5.5V 016 MHzFlash memory 5Vversion (Note 5)Vcc=2.7V to 4.2V 04 X Vcc-0.8MHzf (XcIN) Subclock oscillation frequency32.768 50 kHzNote 1: The mean output current is the mean value within 100ms.Note 2: The total IOL (peak) for ports P0, P1, P2, P86, P87, P9, and P10 must be 80mA max. The total IOH (peak) for ports P0, P1,P2, P86, P87, P9, and P10 must be 80mA max. The total IOL (peak) for ports P3, P4, P5, P6, P7, and P80 to P84 must be80mA max. The total IOH (peak) for ports P3, P4, P5, P6, P72 to P77, and P80 to P84 must be 80mA max.Note 3: Specify a product of -40°C to 85°C to use it.Note 4: Relationship between main clock oscillation frequency and supply voltage.16.03.50.0Main clock input oscillation frequency(EPROM version, One-time PROMversion, No wait)2.7 4.5 5.56.95 X VCC - 15.275MHZSupply voltage[V](BCLK: no division)Main clock input oscillation frequency(Mask ROM version, Flash memory 5V version,No wait)16.07.33 X VCC - 14.791MHZ5.00.02.7 4.2 5.5Supply voltage[V](BCLK: no division)16.07.00.0Main clock input oscillation frequency(EPROM version, One-time PROMversion, With wait)2.7 4.5 5.55 X VCC - 6.5MHZSupply voltage[V](BCLK: no division)16.010.00.0Main clock input oscillation frequency(Mask ROM version, Flash memory 5Vversion, With wait)2.7 4.2 5.54 X VCC - 0.8MHZSupply voltage[V](BCLK: no division)Note 5: Execute case without wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 6.25 MHz. Execute casewith wait, program / erase of flash memory by VCC=4.2V to 5.5V and f(BCLK) ≤ 12.5 MHz.182