Datascope Passport - Mindray

Operation Status Messages
MESSAGE REASON ACTION
GM: Agent
Mismatch - ENF
GM: Agent
Mismatch - SEV
GM: Agent
Mismatch - DES
GM: Unknown
Agent
GM: Cannot Zero...
RETRYING
Appears when the system detects
Enflurane as the primary agent and the
manually selected agent is not Enflurane.
Appears when the system detects
Sevoflurane as the primary agent and the
manually selected agent is not
Sevoflurane.
Appears when the system detects
Desflurane as the primary agent and the
manually selected agent is not
Desflurane.
Appears when the system detects a gas
that does not match the spectroscopic
signatures of the five known anesthetic
agents.
Appears when the Passport requests a
Zeroing (either on the automatic cycle or
by a user request), and the Gas Module
is unable to initialize the cycle.
GM: ET CO 2 High Appears when the End Tidal CO 2
measurement is greater than or equal to
the value set for the ET CO 2 High Alarm.
GM: ET CO 2 Low Appears when the End Tidal CO 2
measurement is less than or equal to the
value set for the ET CO 2 Low Alarm.
GM: INSP CO 2
High
Appears when the FiCO 2 measurement is
greater than or equal to the value set for
the INSP CO 2 High Alarm.
GM: ET O 2 High Appears when the End Tidal O 2
measurement is greater than or equal to
the value set for the ET O 2 High Alarm.
GM: ET O 2 Low Appears when the End Tidal O 2
measurement is less than or equal to the
value set for the ET O 2 Low Alarm.
GM: INSP O 2 High Appears when the FiO 2 measurement is
greater than or equal to the value set for
the INSP O 2 High Alarm.
GM: INSP O 2 Low Appears when the FiO 2 measurement is
less than or equal to the value set for the
INSP O 2 Low Alarm.
GM: INSP N 2O
High
Appears when the Inspired N 2O
measurement is greater than or equal to
the value set for the INSP N 2O High
Alarm.
GM: ET Agent High Appears when the End Tidal Anesthetic
Agent measurement is greater than or
equal to the value set for the ET Agent
High Alarm.
GM: ET Agent Low Appears when the End Tidal Anesthetic
Agent measurement is less than or equal
to the value set for the ET Agent Low
Alarm.
Match the Agent administered
with the Agent selected, or
select Agent Auto ID.
Match the Agent administered
with the Agent selected, or
select Agent Auto ID.
Match the Agent administered
with the Agent selected, or
select Agent Auto ID.
Use recognized agent.
Allow system to retry without
intervention. If problem persists
call for service.
Check patient.
Check patient.
Check patient.
Check patient.
Check patient.
Check patient.
Check patient.
Check patient.
Check patient.
Check patient.
Passport 2 ® /Passport 2 LT Operating Instructions 0070-10-0649-01 3 - 83