v5.20 - Classic DocuShare Home - Trimble

5 In the Field
B Tip
– The feature that is repeated is normally the last feature of that type
that was collected. However you can repeat the attributes of any feature in
the file. To repeat a feature, press{to switch to the Review data list,
highlight the feature on the list, and press \ to open it and check its
attributes. If necessary, you can then press = to close the feature, but
you do not have to close it before repeating it. Pressbto return to the
Start feature form and pressJ.
Note – Offsets, except those configured as constant offsets, are not
repeated when you pressJ.
Nested point features
When you pressNon the attribute entry form for a line or area
feature, the Asset Surveyor software displays a menu of point features
that can be nested within that line or area, for example:
When you select a point feature from this menu, the Asset Surveyor
software lets you enter attributes for it, and all GPS positions that are
logged subsequently are associated with it (rather than with the line or
area feature within which the point is nested). When you save the
point feature, the Asset Surveyor software again logs positions for the
outer line or area feature.
84 TSC1 Asset Surveyor Operation Manual