v5.20 - Classic DocuShare Home - Trimble

5 In the Field
These are some of the ways you can create a waypoint:
Inthe Map pressT module, orGand thenB. Either
type in coordinates or presshto use the current GPS
position. The default coordinates are the coordinates of the
current GPS position or the map cursor position if it is active.
Inthe Navigation module, pressTorGand thenB.
Either type in coordinates or presshto use the current GPS
position. The default coordinates are the coordinates of the
current GPS position or the map cursor position if it is active.
Inthe Data Collection module, open a file for review. In the
Review data list, select a feature, pressQand then, for a line
or area feature, select a single point in the feature. GPS details
for the point appear in the Averaged position Pressw
form.
to create a waypoint at this position.
Inthe Utilities module, choose the Waypoints menu option, then
pressB. Either type in coordinates pressh or to use the
current GPS position. The default coordinates are the
coordinates of the current GPS position or the map cursor
position if it is active.
Editing and reviewing waypoints
Whenever a list of waypoints is displayed, thee,x,d,and
softkeys appear. You can edit a waypoint from the Select start or
Select target menus in the Map and Navigation screens, or from the
Review waypoint list in the Utilities module. By pressing the
appropriate softkey you can:
edit the name or position of a selected waypoint
D
measure the distance between any two waypoints
delete a selected waypoint
delete all waypoints
136 TSC1 Asset Surveyor Operation Manual