v5.20 - Classic DocuShare Home - Trimble

5 In the Field
The Sort by Distance from GPS (2D) option arranges the list to display
the features that are closest to the current GPS position first, followed
by more distant features, then messages and notes. The height of a
feature is ignored when calculating its distance from the GPS position.
The Sort by Distance from cursor (2D) option arranges the list to
display the features which are closest to the location of the map cursor
first, followed by more distant features, then messages and notes. The
height of a feature is ignored when calculating its distance from the
map cursor. This option is only available when the Map module is
open and the map cursor is activated. For more information on the
map cursor, see Using the Map, page 116.
Filtering
When you filter the Review data list, the Asset Surveyor software
hides or shows features in the list according to the setup you choose.
To view the list of filter types, press the^softkey. Highlight any
entryinthelistandpress\ to enable this filter. A check mark ( )
appears to the left of any enabled filter option. To clear a check mark,
highlight the option and press \ again:
104 TSC1 Asset Surveyor Operation Manual