v5.20 - Classic DocuShare Home - Trimble

Introduction to the TSC1 Datalogger 3
3.3 Turning the TSC1 Datalogger On and Off
3.3.1 Hard Keys
3.3.2 Alternate Keys
To turn on the TSC1 datalogger, make sure that power is supplied (see
Power Sources, page 30). Then press the green on/off key marked |.
To turn off the TSC1 datalogger, hold | down for one second.
For the location of | the key and other keys on the TSC1 keypad,
seeFigure3.1.
Hard keys are the physical keys on the TSC1 keypad, such as 1,
a, \, (, ), and=. Use these keys to enter data and to access
different screens.
Alternate keys give some hard keys a second function. Some of the
second functions are displayed on the hard keys in small yellow
lettering. To use a second function, press [ the hard key and then
press the alternate hard key.
Table 3.1 shows some of the functions that you can access using
alternate keys.
Table 3.1 Useful second functions
Keys Function
[ )
[ _
[ *
[ (
[ N
Page down
Page up
Home
End
Previous screen
TSC1 Asset Surveyor Operation Manual 23