v5.20 - Classic DocuShare Home - Trimble

I Laser Rangefinders
I.3.5 Collecting Data
The following sections outline data collection.
Activating the laser interface
Within Data collection, the laser rangefinder interface can be activated
in one of two ways:
Automatically, if you preconfigured the Laser sensor’s
Auto-connect field to ‘Yes’.
Manually, using the softkey when logging data to a file. X
Checking the laser interface
You can also use theXsoftkey to access the Select sensor menu to
reconfigure the laser rangefinder interface, or to check that the laser
and the Asset Surveyor software are communicating correctly, as
described above.
Recording an offset
Whenever you are collecting a point feature, you can use the
ProSurvey 1000 laser rangefinder to record an offset to the feature.
You can record an offset to a line, area, or quickmark feature only
when you have pressed theO softkey to open the offset entry form
for that feature.
344 TSC1 Asset Surveyor Operation Manual