v5.20 - Classic DocuShare Home - Trimble

A Pro XRS System
A.5.4 Overdetermined Positions
The Pro XRS receiver supports the computation of overdetermined
GPS positions.
A.5.5 Carrier Phase Mode
The Pro XRS receiver can be operated in carrier phase mode. You
enable carrier phase mode from GPS rover options / Logging options.
If you are using the integrated GPS/Beacon/Satellite antenna
(P/N 33580-50), then ‘Integrated GPS/Beacon/Sat DGPS’ must be
selected from the Type fieldmenuintheAntenna options form. If you
are using a compact dome antenna, then ‘Compact Dome’ must be
selected.
Alternatively, you can enter the part number straight off the antenna
itself (that is, for the ‘Integrated GPS/Beacon/Sat DGPS’, you would
select P/N 33580-50, or for the Compact Dome, you would select
P/N 16741- 00).
A.5.6 PPRT Positions (Postprocessed Real-Time)
The Pro XRS receiver can be configured to collect PPRT positions,
enabling the user to differentially correct real-time collected data.
A.5.7 Receiver Outputs
The Pro XRS receiver supports TSIP and NMEA output. It also
supports (without any need for configuration of the Asset Surveyor
software) 1 PPS output.
236 TSC1 Asset Surveyor Operation Manual