v5.20 - Classic DocuShare Home - Trimble

4 Before Leaving the Office
4.9.2 Non-critical Settings
The non-critical configuration settings are listed in Table 4.2. For each
setting, the default (and suggested) value is indicated.
All non-critical settings can be found under entries in the
Configuration menu. Table 4.2 also indicates under which entry in the
Configuration menu you find the setting. The Configuration menu is
accessed from the Main menu.
Table 4.2 Non-critical configuration settings
Setting Default value Configuration menu entry
Antenna options Integrated
GPS/Beacon, 0.0m
56 TSC1 Asset Surveyor Operation Manual
GPS rover options
GPS base station options
Initial position ? GPS rover options
2D altitude ? GPS rover options
Carrier phase
Minimum time 10 minutes GPS rover options / Logging options
Reference position ? GPS base station options
Dynamics code Land GPS rover options / Logging options
Audible click Yes GPS rover options / Logging options
Log DOP data Yes GPS rover options / Logging options
GPS base station options / Logging options
Log PPRT data Yes GPS rover options / Logging options
Log QA/QC data Yes GPS rover options / Logging options
Allow GPS update Warn first GPS rover options / Logging options
Warning distance Any GPS rover options / Logging options
Apply real-time Auto GPS rover options / Position filters
RTK mode On GPS rover options / Position filters
Log RTK only Yes GPS rover options / Positions filters
Real-time input options Custom, 9600, 8, 1,
N, Any, 20s
Communications options