v5.20 - Classic DocuShare Home - Trimble

A Pro XRS System
Racal-LandStar will:
3. Tell you the LandStar satellite and frequency for your local
area.
4. Place you on an activation verification list.
Note – Phone numbers and further details on how to access the
Racal-LandStar service are contained in the LandStar booklet that
accompanies this product.
Step 3 – Configure the Pro XRS GPS receiver
1. Open the Real-time input form (select Configuration/GPS rover
options/Real-time input).
2. Set one of the Choice fields to ‘Integrated satellite’.
3. With this Choice field highlighted, pressSto open the
Integrated satellite form, where you can configure this realtime
source.
4. Set the Service Provider fieldto‘LandStar’.
5. Enter the satellite you want to receive corrections from in the
Satellite field. The Frequency field is automatically set once the
Satellite field is configured.
6. Set the Station preference field to ‘Virtual’ or ‘Closest’,
depending on your requirements.
7. \ Press to start the activation process.
Step 4 – Wait 45 minutes
Wait up to 45 minutes for the activation process to complete.
Note – If the activation process is not completed within 45 minutes,
call Racal-LandStar and report your problem.
Note – The 45 minute wait period is for activation only. Once
activated, Racal-LandStar corrections begin less than 15 seconds
after configuring the Pro XRS receiver to receive them.
242 TSC1 Asset Surveyor Operation Manual