v5.20 - Classic DocuShare Home - Trimble

5 In the Field
5.6.2 Zooming
Use the+and_softkeys to reduce or enlarge the scale of the
map. The maximum zoom scale is 25 cm, and the minimum is
2000 km.
When you press the=key, the software zooms to the extent of the
map, automatically selecting the zoom scale at which all features and
waypoints in the map can be shown.
When you open the Map module, the software automatically zooms to
include the contents of the data (foreground) and background files,
any waypoints defined, and the current or, if the receiver is not
connected, the old GPS position. If there is no data file open, or there
is only a single GPS position, the Map screen uses a default display
scale of 250 meters, centered on the GPS position.
5.6.3 Display Options
B Tip
Press the& softkey to display the Map display options form, where
you can customize the map display. These settings are stored and
applied to each data file you open, so the map displays in the same
way for all files until you change it.
– You can also use the Map display options command in the
Configuration module to open this screen.
118 TSC1 Asset Surveyor Operation Manual