v5.20 - Classic DocuShare Home - Trimble

5 In the Field
Switching between Data Entry and Review mode is like switching
between modules. You do not lose any unsaved data when you switch,
and when you switch back, you return to the form and field you were
working with. This means you can open an existing feature for review
and start a new feature at the same time.
Position
PressQto open the Averaged position form for the highlighted
feature. If the feature is a line or area, the Asset Surveyor software
displays the Which position form first, so you can select which point
of the feature to display details for. For a line feature, you can view the
position information for the start or end of the line. If the feature is an
area, you can choose to see the position details of the start/end point,
or the centroid (the calculated center of the area).
The average latitude, longitude, and height of the feature, or the
selected point in the feature, appear in the Averaged position form,
with the datum and zone they were recorded in:
You cannot edit this position information here. For more information
on how to change the GPS position of an existing feature, see
Updating position, page 110.
100 TSC1 Asset Surveyor Operation Manual