v5.20 - Classic DocuShare Home - Trimble

8.3.5 Batteries
RTK Mapping 8
The following batteries and accessories come with a Series 4000 or
Site Surveyor 4400 RTK system:
12V 10AH battery for powering the base receiver
(P/N 13542-10)
12V 2.3AH camcorder batteries for powering the roving
receiver (P/N 17466)
A camcorder battery cable (P/N 18294). This cable connects
both batteries in series. To utilize both batteries connect the
cable to the port labeled PWR 2&3 on Series 4000 or 4400
receivers. The receiver port auto-switches to the second battery
when the voltage of the first battery falls below the required
level. Even though the two batteries are connected in series,
only one is used at a time.
The following batteries and accessories come standard with a GPS
Total Station 4800 RTK system:
6AH battery for powering the base receiver (P/N 32364-00)
3 PowerLiTE batteries for powering the roving receiver
(P/N 31030-00)
Note – Radios come with their own batteries, or they are powered
directly from the receiver. The type of battery depends on which radio
solution is purchased.
TSC1 Asset Surveyor Operation Manual 207