v5.20 - Classic DocuShare Home - Trimble

4 Before Leaving the Office
4.9.1 Critical Settings
The critical configuration settings are listed in Table 4.1. For each
setting, the default (and suggested) value is indicated. For a detailed
description of each setting, refer to the chapter on configuration in the
TSC1 Asset Surveyor Software User Guide.
All critical settings can be checked or changed by selecting GPS rover
options or GPS base station options from the Configuration menu.
The Configuration menu is accessed from the Main menu.
Table 4.1 Critical configuration settings
Setting Default value Configuration menu entry
Logging intervals (rover)
Point feature
Line and area features
Not in feature
Velocity
5 seconds
5 seconds
None
None
54 TSC1 Asset Surveyor Operation Manual
GPS rover options / Logging options
Logging intervals (base)
GPS base station options / Logging
Measurements 5 seconds options
Minimum positions (point feature) 3 GPS rover options / Logging options
Position mode (rover) Manual 3D GPS rover options / Position filters
Elevation mask (rover) 15° GPS rover options / Position filters
SNR mask (rover) 6.0 GPS rover options / Position filters
PDOP mask and switch (rover) 6.0 GPS rover options / Position filters
Position mode (base) Manual 3D GPS base station options / Position filters
Elevation mask (base) 10° GPS base station options / Position filters
SNR mask (base) 4.0 GPS base station options / Position filters
PDOP mask and switch (base) 8.0 GPS base station options/ Position filters