v5.20 - Classic DocuShare Home - Trimble

A Pro XRS System
5. Place you on an activation verification list.
Note – Phone numbers and further details on how to access the
Fugro-OmniSTAR service are contained in the OmniSTAR booklet that
accompanies this product.
Step 3 – Configure the Pro XRS GPS receiver
1. Connect Asset Surveyor to the Pro XRS receiver and begin
tracking GPS satellites with a clear view of the sky.
2. Open the Real-time input form (select Configuration/GPS rover
options/Real-time input).
3. Set one of the Choice fields to ‘Integrated satellite’.
4. With this Choice field highlighted, pressSto open the
Integrated satellite form, where you can configure this realtime
source.
5. Set the Service provider fieldto‘OmniSTAR’.
6. Enter the satellite you want to receive corrections from in the
Satellite field. The Frequency and Data rate fields are
automatically set once the Satellite field has been configured.
7. Press \.
8. The message Do you have a 24-digit code to enter? appears. Do one of
the following:
– if OmniSTAR has supplied you with a 24-digit activation
code, press theysoftkey, and then proceed to step 8
– to enter the selected configuration and start the on-air
activation process, press thensoftkey
9. Enter the 24-digit code you received from OmniSTAR into the
Activation code entry form and press \ to start the activation
process.
240 TSC1 Asset Surveyor Operation Manual