v5.20 - Classic DocuShare Home - Trimble

5 In the Field
5.5.4 Updating Features
To update attributes of a feature, simply highlight the feature in the
Review data list or in the Map screen, press \, and edit it in the
update form that appears. In practice, you may need to navigate to the
feature before you can check its attributes. To update its GPS position,
you must return to the exact position of the feature. You can use the
Map module or the Navigation module to guide you back to the
location of any feature.
Target
In the Review data list, you can make a feature the navigation Target
by highlighting it in the menu and pressingG. TheTargeticon
appears beside the selected feature, and the Navigation module and
Map screen change to navigate towards this point:
In the Map module and the Navigation module, you can select a Start
position as well as a Target. The Start and Target can be either a
feature or a waypoint. For more information on selecting Start and
Target positions, see Using the Map, page 116, and Navigating with
the Asset Surveyor Software, page 125.
108 TSC1 Asset Surveyor Operation Manual