v5.20 - Classic DocuShare Home - Trimble

In the Field 5
To nest the updating of an existing point feature, pressAon the
Nest feature menu. A menu of existing point features appears.
Highlight a feature on the menu and \ press to update the attributes
or GPS position of the point feature. For more information on
updating features, see Updating Data, page 94.
You can nest as many point features within a line or area feature as
necessary. For more information on nesting, and for more information
on how to nest points that do not lie right on a line or on an area’s
perimeter, refer to Chapter 3, Data Collection, in the TSC1 Asset
Surveyor Software User Guide.
Quickmarked point features
If you have a large number of point features to collect, and you do not
require the best possible GPS position accuracy for these point
features, you can record them by quickmarking. This technique does
not require you to remain stationary at a feature at all; you simply
travel past the feature and at the moment you pass each feature you
press a key on the TSC1 datalogger. The Asset Surveyor software
instantly computes a single GPS position for the feature.
When you pressqon the Start Feature menu, the Asset Surveyor
software displays a menu of point features, for example:
TSC1 Asset Surveyor Operation Manual 85