v5.20 - Classic DocuShare Home - Trimble

In the Field 5
Point features
When you are collecting a point feature, there are several softkeys at
the bottom of the attribute entry form. You can press these to perform
various operations while you are entering attribute values for the point
feature, or while waiting for the Asset Surveyor software to complete
the logging of GPS positions for that point feature.
An example of the attribute entry form for a point feature is the
following:
The ‘?’ value is the configurable ‘Null string’. It indicates that no
value has been entered or supplied as a default for the corresponding
attributes.
TheXsoftkey provides access to external sensor configuration and
PressO control. to view, enter, or edit the (optional) offset for this
point Thep feature. softkey lets you pause GPS position logging.
Press{to switch to the Review data list. This is a list of features,
notes, and messages logged to this file so far. You can view or edit the
GPS positions, offsets, and attributes of features in the file from this
list. To switch from review mode back to the attribute form for the
new point feature, pressb.
Note – For more information on how to collect carrier phase point
features, see Chapter 7, Carrier Phase Data Collection.
TSC1 Asset Surveyor Operation Manual 77