v5.20 - Classic DocuShare Home - Trimble

In the Field 5
Note – The entire contents of this form do not fit onto the screen at
once. You must move through the form (using )) in order to check all of
the fields in the form.
Once the Asset Surveyor software is communicating with a Trimble
GPS receiver, your interaction with the GPS receiver takes place
through four of the Main menu operations:
Navigation
Map
Receiver status
Satellite information.
M Press at any time to display the Main menu.
Your current GPS position
To view your current or most recent GPS position, select the Map
entry from the Main menu, then the@ press softkey. The position
is displayed, as shown below:
When the Asset Surveyor software cannot obtain a current GPS
position from the GPS receiver (for example, due to a high PDOP
value, or insufficient satellites), the title of this form changes to OLD
position, and flashes on and off.
TSC1 Asset Surveyor Operation Manual 67