v5.20 - Classic DocuShare Home - Trimble

C
Laser Rangefinders I
Set the Type field to either ‘Criterion 300’ or ‘Criterion 400’. If you
generally use a Criterion rangefinder when collecting data, and if you
typically do not use any other type of external sensor, then set the
Auto-connect field to ‘Yes’.
Set the Confirm offsets fieldto‘On’todisplaytheOffset form for the
currently open feature whenever you send an offset from a laser
rangefinder.
Set the Confirm offsets field to ‘Off’ to automatically record offset
values to the open feature when you fire the rangefinder. The Offset
form does not appear unless an entry is required, when it will appear
automatically. The message Offset received appears briefly in the status
line, but no other notification appears unless an entry is required. You
can pressOin the attribute entry form to open the Offset form if
you want to confirm offset values.
Set the Serial port according to the port you connect the Criterion to,
either ‘Top’ or ‘Bottom’.
Warning – The RS232 protocols used by the Criterion 300 and 400
rangefinders are different. You must specify the correct rangefinder in the
Type field, otherwise the Asset Surveyor software fails to communicate
with your rangefinder.
Press \ to save these settings and return to the Select sensor menu.
TSC1 Asset Surveyor Operation Manual 323