v5.20 - Classic DocuShare Home - Trimble

4 Before Leaving the Office
You can use one of the predefined names (GIS Datalogger on
COM 1 or GIS Datalogger on COM 2, depending on which
serial (COM) port the support module is connected to) or you
can set up a new device definition.
The Data Transfer utility automatically connects to the
datalogger.
4. In the Send tab, click Add.
The Open dialog appears.
5. In the Files of type field, select the format of the files that you
want to send. For example, select Data Dictionary (*.ddf) to
send Data Dictionary files.
6. In the list of files, highlight the file or files you want to transfer
and click Select.
The Open dialog disappears, and the files you selected appear in
the Files to Send list.
7. If necessary, repeat Step 4 through Step 6 to select other files to
send.
8. Click Transfer All.
The selected files are transferred to the Asset Surveyor
software.
9. A message showing summary information about the transfer
appears. Click Close.
10. To close the Data Transfer utility, click Close.
52 TSC1 Asset Surveyor Operation Manual