v5.20 - Classic DocuShare Home - Trimble

In the Field 5
To specify the filtering details of a filter, highlight the filtering option
you require and pressS. The filtering options displayed depend on
the filter you selected:
Note – Filtering affects the whole system, including searching, Start
and Target menus, and the Map module.
If you choose to filter by feature, the Feature type filtering form lists
each feature type in the data dictionary as a field. You can set the value
of each field to ‘Show’ or ‘Hide’, or use the}or|softkeys to
set all fields to the same value.
The Attribute filtering form contains a number of fields representing
each of the feature types, attributes, and attribute values in the data
dictionary that is associated with the open data file. After selecting a
field from the Feature type field, and an attribute for that field from
the Attribute field, use the Attribute value fieldtospecifyavalueto
filter on, and the Operator field to select the comparison operation. If
there is no attribute or a text attribute selected, the default operator is
‘Containing’, but you can select ‘Not containing’. For other attribute
types the default value is ‘Equals’, but you can select ‘Not equal to’,
‘Greater than’ or ‘Less than’. Features not matching these parameters
will be hidden.
TSC1 Asset Surveyor Operation Manual 105