v5.20 - Classic DocuShare Home - Trimble

5 In the Field
Updating position
If the position recorded for a feature is not precise enough, or no
positions have been recorded, you can record a new position for the
feature whether you update its attributes or not. To record a new
position, press3intheupdateform.Thesoftwareasksyouto
confirm that you want to update the positions for this feature. Choose
to start logging GPS data. The3softkey changes to the
softkey, as described in Pausing and resuming, page 82. When
you have reached the end of a line or area feature, or have recorded
enough positions for a point feature, press
y
to save the new GPS
\
data for the feature. To abandon the update and restore the original
position(s) to the feature,
p
press = instead.
Marking a feature as Updated
If you make changes to the attributes or position recorded for a
feature, the status of the feature changes to Updated. However,
sometimes you may want to simply flag the feature as Updated, to
show that it has been visited and checked, without changing any other
information about it. To mark a feature as updated, open the feature for
editing and press the(softkey:
The feature status changes to Updated but no other information
changes.
110 TSC1 Asset Surveyor Operation Manual