v5.20 - Classic DocuShare Home - Trimble

More documents

Recommendations

Info

8 RTK Mapping 6. Select the type of correction record to broadcast in the RTK record type field. This will depend on whether the rovers using this base station are all RTK, or a combination of RTK and real-time differential. By default, ‘CMR’ is selected. For more information on RTK correction messages, see RTK Correction Messages, page 190. 7. Connect the TSC1 datalogger to the GPS receiver port labeled PWR-I/O 1 (Port 1 on the 4800 unit) using the 7-pin lemo to 5-pin lemo cable (P/N 32901). For the 4800, use the 7-pin lemo to 7-pin lemo cable (P/N 31288). Note – If you are using a Series 4000 receiver as the base receiver, you may want to configure and start the base station using the receiver’s front panel. In this case, there is no need to connect the TSC1 datalogger to the base receiver. A summary of the recommended settings within the Position filters form and RTK precision options form, to ensure RTK operation, is showninTable8.3. Table 8.3 Recommended RTK settings in Asset Surveyor Command Recommended setting Apply real-time On RTK mode (4000 only) On Log RTK only (4400/4800) Yes RTK Static precision Horizontal Vertical RTK Roving precision Horizontal Vertical 216 TSC1 Asset Surveyor Operation Manual 0.05m 0.05m 0.1m 0.15m
RTK Mapping 8 To ensure RTK corrections are applied, Apply real-time must be set to either ‘Yes’ or ‘Auto’. If Apply real-time is set to ‘Auto’, then RTK static and roving precisions cannot be accessed theR using softkey). This option is directly associated with real-time applications, whether they are for RTK or differential applications. For more information on the use of this setting, refer to the TSC1 Asset Surveyor Software User Guide. When connected to a Series 4000 receiver, set the RTK mode field to ‘On’ to ensure a centimeter level of precision is achieved. This option is only available if an RTK capable GPS receiver is connected. If RTK mode is set to ‘Off’, then the RTK static and roving precisions cannot be accessed. Note – RTK precision settings do not apply when Apply real-time is set to ‘Auto’. When connected to a Site Surveyor 4400 receiver or GPS Total Station 4800, set the Log RTK only field to ‘Yes’ to ensure a centimeter level of precision is achieved. This option is only available if an RTK capable GPS receiver is connected and Apply real-time is set to ‘Yes’. If Log RTK only is set to ‘No’, then the RTK static and roving precisions cannot be accessed. The RTK Static and Roving precision settings are used to specify tolerances within which the GPS positions must fall before they are logged. The settings can be selected from a short list of options or keyed in as a user-defined setting. Static and roving techniques are discussed more extensively in Data Collection, page 197. TSC1 Asset Surveyor Operation Manual 217
Page 1:
TSC1 Asset Surveyor Operation Manua
Page 4 and 5:
Corporate Office Trimble Navigation
Page 7 and 8:
Contents About This Manual 1 Quick
Page 9 and 10:
Data Files . . . . . . . . . . . .
Page 11 and 12:
7 Carrier Phase Data Collection Int
Page 13 and 14:
B Pro XR System Introduction . . .
Page 15 and 16:
Base Station Operation. . . . . . .
Page 17 and 18:
Configuration for Use with the Asse
Page 19 and 20:
About This Manual Welcome to the TS
Page 21 and 22:
About This Manual Technical Assista
Page 23 and 24:
1 Quick Setup In this chapter: ■
Page 25 and 26:
1.2 Before Leaving the Office Quick
Page 27 and 28:
1.5 Rover Configuration Quick Setup
Page 29 and 30:
1.5.1 Data Collection Quick Setup 1
Page 31 and 32:
1.6.1 Base Station Data Collection
Page 33 and 34:
2 Introduction to the Asset Surveyo
Page 35 and 36:
Introduction to the Asset Surveyor
Page 37 and 38:
2.3 System Components 2.3.1 GPS Rec
Page 39 and 40:
Introduction to the Asset Surveyor
Page 41 and 42:
3 Introduction to the TSC1 Datalogg
Page 43 and 44:
Function keys Backspace key Space k
Page 45 and 46:
Introduction to the TSC1 Datalogger
Page 47 and 48:
3.3.4 Menu Key 3.3.5 Next Key 3.3.6
Page 49 and 50:
3.5.1 Choosing a PC Card 3.6 Reboot
Page 51 and 52:
3.7 Data Capacity B Tip Introductio
Page 53 and 54:
3.9.1 Battery Status Introduction t
Page 55 and 56:
Introduction to the TSC1 Datalogger
Page 57 and 58:
3.11Servicing Introduction to the T
Page 59 and 60:
4 Before Leaving the Office In this
Page 61 and 62:
Before Leaving the Office 4 The Qui
Page 63 and 64:
4.3.1 Creating a Project Before Lea
Page 65 and 66:
Before Leaving the Office 4 To star
Page 67 and 68:
4.7 Data Files Before Leaving the O
Page 69 and 70:
Before Leaving the Office 4 To ensu
Page 71 and 72:
4.8 Data Transfer B Tip Before Leav
Page 73 and 74:
4.8.2 Transferring Files to the TSC
Page 75 and 76:
4.9 Configuring the System Before L
Page 77 and 78:
B Tip Before Leaving the Office 4 T
Page 79 and 80:
Table 4.2 Non-critical configuratio
Page 81 and 82:
Table 4.3 Display configuration set
Page 83 and 84:
5 In the Field In this chapter: ■
Page 85 and 86:
In the Field 5 When you first start
Page 87 and 88:
In the Field 5 If the Asset Surveyo
Page 89 and 90:
In the Field 5 Note - The entire co
Page 91 and 92:
In the Field 5 The skyplot is a gra
Page 93 and 94:
In the Field 5 The Asset Surveyor s
Page 95 and 96:
In the Field 5 You can perform a va
Page 97 and 98:
Points Well sites Power poles Accid
Page 99 and 100:
In the Field 5 Point features When
Page 101 and 102:
In the Field 5 To segment a line fe
Page 103 and 104:
In the Field 5 Reviewing features W
Page 105 and 106:
B Tip In the Field 5 Repeating feat
Page 107 and 108:
In the Field 5 To nest the updating
Page 109 and 110:
In the Field 5 when driving along a
Page 111 and 112:
B Tip In the Field 5 A line, area,
Page 113 and 114:
B Tip In the Field 5 This form cont
Page 115 and 116:
In the Field 5 When you have finish
Page 117 and 118:
B Tip In the Field 5 The fields in
Page 119 and 120:
In the Field 5 Feature icons Each e
Page 121 and 122:
In the Field 5 Note - Changing a fe
Page 123 and 124:
In the Field 5 You can use this for
Page 125 and 126:
5.5.3 File Operations In the Field
Page 127 and 128:
In the Field 5 To specify the filte
Page 129 and 130:
In the Field 5 Searching In a large
Page 131 and 132:
In the Field 5 Updating attributes
Page 133 and 134:
In the Field 5 If a feature has alr
Page 135 and 136:
5.5.5 Collecting New Features B Tip
Page 137 and 138:
5.5.7 Exiting Data Update B Tip In
Page 139 and 140:
The default mode is graphical. Use
Page 141 and 142:
In the Field 5 In the Map display o
Page 143 and 144:
5.6.4 Navigating Using the Map In t
Page 145 and 146:
In the Field 5 When a feature’s l
Page 147 and 148:
5.7 Navigating with the Asset Surve
Page 149 and 150:
B Tip 5.7.2 Heading Lock In the Fie
Page 151 and 152:
B Tip In the Field 5 Close-up scree
Page 153 and 154:
5.7.5 Road Screen In the Field 5 Th
Page 155 and 156:
5.7.6 Info Panels In the Field 5 In
Page 157 and 158:
5.7.7 Waypoints In the Field 5 An A
Page 159 and 160:
5.8 Managing Data Files C 5.8.1 Del
Page 161 and 162:
5.8.3 Copying Files to and from the
Page 163 and 164:
6 Back in the Office In this chapte
Page 165 and 166:
B Tip Back in the Office 6 Transfer
Page 167 and 168:
Back in the Office 6 To transfer fi
Page 169 and 170:
B Tip Back in the Office 6 4. From
Page 171 and 172:
The Data Transfer dialog appears: B
Page 173 and 174:
Back in the Office 6 6. In the list
Page 175 and 176:
6.4.1 Starting Differential Correct
Page 177 and 178:
The Map window now displays this da
Page 179 and 180:
Back in the Office 6 To export data
Page 181 and 182:
6.7 Batch Processor Back in the Off
Page 183 and 184:
CHAPTER 7 7 Carrier Phase Data Coll
Page 185 and 186:
7.2.2 Planning Carrier Phase Data C
Page 187 and 188: Carrier Phase Data Collection 7 Tim
Page 189 and 190: Number of SVs 8 7 6 5 4 3 2 1 A Car
Page 191 and 192: Carrier Phase Data Collection 7 Alt
Page 193 and 194: 7.2.7 Postprocessing Carrier Phase
Page 195 and 196: C Carrier Phase Data Collection 7 3
Page 197 and 198: 7.4 In the Field Carrier Phase Data
Page 199 and 200: 7.4.2 Starting to Log Data Carrier
Page 201 and 202: 7.4.4 Logging Carrier Phase Data Ca
Page 203 and 204: Carrier Phase Data Collection 7 Ify
Page 205 and 206: 7.5 Back In the Office Carrier Phas
Page 207 and 208: 8 RTK Mapping In this chapter: ■
Page 209 and 210: RTK Mapping 8 While the RTK system
Page 211 and 212: RTK Mapping 8 The difference betwee
Page 213 and 214: C RTK Mapping 8 Warning - If you ar
Page 215 and 216: RTK Mapping 8 In the Asset Surveyor
Page 217 and 218: RTK Mapping 8 Note - You cannot der
Page 219 and 220: 8.2.5 Data Collection RTK Mapping 8
Page 221 and 222: RTK Mapping 8 Positions logged in R
Page 223 and 224: RTK Mapping 8 Selecting a site for
Page 225 and 226: 8.3.3 Radios C RTK Mapping 8 Trimbl
Page 227 and 228: Measure to here Correction Uncorrec
Page 229 and 230: 8.3.5 Batteries RTK Mapping 8 The f
Page 231 and 232: SC1 datalogger TSC1 data cable PWR-
Page 233 and 234: RTK Mapping 8 4. Connect the radio
Page 235 and 236: RTK Mapping 8 2. Assemble and erect
Page 237: The Real-time output options form a
Page 241 and 242: RTK Mapping 8 8.3.7 Setting up a Ro
Page 243 and 244: 8.4 In the Field RTK Mapping 8 Once
Page 245 and 246: RTK Mapping 8 Note - These port set
Page 247 and 248: RTK Mapping 8 8.4.3 Recording Less
Page 249 and 250: RTK Mapping 8 8.5.1 RTK Positions i
Page 251 and 252: B Tip RTK Mapping 8 - Use Filter by
Page 253 and 254: A Pro XRS System In this chapter:
Page 255 and 256: Pro XRS System A A.4 Configuring th
Page 257 and 258: A.5.3 RTCM Output Pro XRS System A
Page 259 and 260: A.6 Cabling Diagram Pro XRS System
Page 261 and 262: Pro XRS System A A.8 Activating Sat
Page 263 and 264: C Warning - Make sure that the 24-d
Page 265 and 266: B Pro XR System In this chapter:
Page 267 and 268: Pro XR System B B.4 Configuring the
Page 269 and 270: Pro XR System B If you require the
Page 271 and 272: B.6 Cabling Diagram Pro XR System B
Page 273 and 274: C ProXL System In this chapter: ■
Page 275 and 276: Pro XL System C C.5 Operational Asp
Page 277 and 278: C.6 Cabling Diagram Pro XL System C
Page 279 and 280: D Series 4000 In this chapter: ■
Page 281 and 282: Series 4000 D For Maxwell Technolog
Page 283 and 284: Series 4000 D If you have changed a
Page 285 and 286: Series 4000 D 3. Page through the v
Page 287 and 288: D.5.3 Overdetermined Positions Seri
Page 289 and 290:
D.5.10 Receiver Outputs D.5.11 Velo
Page 291 and 292:
D.7 Equipment List Series 4000 D Ta
Page 293 and 294:
APPENDIX E E Site Surveyor 4400 Rec
Page 295 and 296:
Site Surveyor 4400 Receiver E E.5 O
Page 297 and 298:
E.5.7 Base Station Operation Site S
Page 299 and 300:
E.7 Equipment List Site Surveyor 44
Page 301 and 302:
F 4600LS Surveyor In this chapter:
Page 303 and 304:
F.5 Operational Aspects Specific to
Page 305 and 306:
F.5.6 Base Station Operation 4600LS
Page 307 and 308:
4600LS Surveyor F Figure F.2 Two-po
Page 309 and 310:
F.7 Equipment List 4600LS Surveyor
Page 311 and 312:
G GPS Total Station 4700 In this ch
Page 313 and 314:
GPS Total Station 4700 G G.5 Config
Page 315 and 316:
G.6.6 Receiver Outputs GPS Total St
Page 317 and 318:
G.8 Equipment List GPS Total Statio
Page 319 and 320:
H GPS Total Station 4800 In this ch
Page 321 and 322:
H.2 Switches and Indicator LEDs GPS
Page 323 and 324:
H.4 Turning the Receiver On GPS Tot
Page 325 and 326:
H.7.3 Real-Time Output GPS Total St
Page 327 and 328:
H.9 Equipment List GPS Total Statio
Page 329 and 330:
I Laser Rangefinders In this chapte
Page 331 and 332:
Laser Rangefinders I Compass detail
Page 333 and 334:
Laser Rangefinders I Cabling for th
Page 335 and 336:
Page 337 and 338:
Laser Rangefinders I 2. Press the
Page 339 and 340:
Laser Rangefinders I 5. Use the ←
Page 341 and 342:
Laser Rangefinders I Entering a com
Page 343 and 344:
Laser Rangefinders I I.2.5 Using th
Page 345 and 346:
C Laser Rangefinders I Set the Type
Page 347 and 348:
Laser Rangefinders I If you attempt
Page 349 and 350:
B Tip Laser Rangefinders I 5. Press
Page 351 and 352:
I.3 Laser Atlanta ProSurvey 1000 La
Page 353 and 354:
Page 355 and 356:
Page 357 and 358:
Laser Rangefinders I Calibration of
Page 359 and 360:
Laser Rangefinders I Select Externa
Page 361 and 362:
Laser Rangefinders I Activating the
Page 363 and 364:
C Laser Rangefinders I Checking the
Page 365 and 366:
C Laser Rangefinders I Warning - Th
Page 367 and 368:
I.4 Laser Atlanta Advantage Laser R
Page 369 and 370:
Page 371 and 372:
Page 373 and 374:
Laser Rangefinders I Calibration of
Page 375 and 376:
Laser Rangefinders I Configuring th
Page 377 and 378:
Laser Rangefinders I If you attempt
Page 379 and 380:
Laser Rangefinders I 3. Keeping a s
Page 381 and 382:
I.4.5 Collecting Data The following
Page 383 and 384:
Laser Rangefinders I Powering The L
Page 385 and 386:
Page 387 and 388:
Laser Rangefinders I I.5.3 Configur
Page 389 and 390:
Page 391 and 392:
Page 393 and 394:
Laser Rangefinders I You can press
Page 395 and 396:
I.5.5 Collecting Data Laser Rangefi
Page 397 and 398:
I.6.2 Accessories Laser Rangefinder
Page 399 and 400:
Page 401 and 402:
Page 403 and 404:
Page 405 and 406:
Page 407 and 408:
Page 409 and 410:
Page 411 and 412:
I.7.2 Accessories Laser Rangefinder
Page 413 and 414:
Page 415 and 416:
Page 417 and 418:
Laser Rangefinders I Testing When y
Page 419 and 420:
Page 421 and 422:
Page 423 and 424:
Page 425 and 426:
J External Sensors In this chapter:
Page 427 and 428:
External Sensors J You can configur
Page 429 and 430:
3. Change the fields in this form a
Page 431 and 432:
B Tip External Sensors J - After co
Page 433 and 434:
J.3 Digital Cameras External Sensor
Page 435 and 436:
3. Change the fields in this form a
Page 437 and 438:
J.4 Echo Sounders External Sensors
Page 439 and 440:
B Tip 3. Change the fields in this
Page 441 and 442:
B Tip External Sensors J The Asset
Page 443 and 444:
K NMEA Output Messages In this chap
Page 445 and 446:
K.2 Common Message Elements NMEA Ou
Page 447 and 448:
Longitude of ascension node Mean an
Page 449 and 450:
NMEA Output Messages K Fields 3 to
Page 451 and 452:
NMEA Output Messages K K.3.8 ZDA: U
Page 453 and 454:
Index Symbols .ddf files 42 importi
Page 455 and 456:
B back in the office 4, 141, 226 ba
Page 457 and 458:
waypoints 68, 101, 135 in GPS Pathf
Page 459 and 460:
File manager module 14, 137-140 fil
Page 461 and 462:
I icons 97 update status 98 Import
Page 463 and 464:
Info panels 133 proximity alarm 130
Page 465 and 466:
echarging the TSC1 battery 32 recom
Page 467 and 468:
statistics, on files 138 status bat
Page 469:
Reader Comment Form TSC1 Asset Surv
show all

v5.20 - Classic DocuShare Home - Trimble

Create successful ePaper yourself

Delete template?

Save as template?