v5.20 - Classic DocuShare Home - Trimble

In the Field 5
The skyplot is a graphical representation of the position of each
satellite in the GPS receiver’s tracking set:
to switch to the SNR levels screen. This screen shows a bar
graph of the signal-to-noise ratio (SNR) of the satellites being tracked.
Press@
Press@to display the Satellite information form. This form
displays five columns of information, and spans as many pages as
required to display information for all satellites in the receiver’s
current tracking set. Press@againtoreturntotheskyplot.
For a description of the modes in this module, refer to Chapter 10,
Satellite Information, in the TSC1 Asset Surveyor Software User
Guide.
Deactivating GPS
Normally, you do not need to disconnect the GPS receiver; you can
just turn the TSC1 datalogger off when you have finished using it.
However, if you want to use the Asset Surveyor software for a while
without using GPS (for example, to review and edit data) and want to
preserve the GPS receiver’s batteries, you may choose to deactivate
the receiver. You must also disconnect communications with the
receiver before transferring files to or from the PC.
TSC1 Asset Surveyor Operation Manual 69