v5.20 - Classic DocuShare Home - Trimble

5 In the Field
If every feature that you record is an offset from your position at the
time you record it, you can configure a constant offset, which is
automatically applied to that class of features. Just modify the feature
offset for specific features that are exceptions to the general rule.
Offsets can be measured and entered manually using a compass and a
tape measure, or simply by pacing out the distance from the feature to
the point at which you are measuring it. The Asset Surveyor software
also supports the collection of offsets for features using a laser
rangefinder. This allows very efficient collection of offsets without the
need to manually enter distances, bearings, or inclinations.
Recording averaged vertices
The averaged vertices feature in the Asset Surveyor software lets you
record several positions for a single location within a line or area
feature. These positions are averaged together to calculate the position
of this vertex. Averaging positions is more accurate than recording a
single position for a vertex.
To record an averaged vertex, press,in the attribute entry form.
This opens the Vertex form:
90 TSC1 Asset Surveyor Operation Manual